Home »
Coating
 |
The
Simple Way For indor signs you might keep the white surface. Or brush, roll or spray material with resin free colors, ie. acryl. EPS pearl structure will be visible. |
 |
For
Outdoor Use
pls. apply thin epoxy hardener twice, lightly sand, add primer and lacquer it (add clear lacquer if you wish a finish, as applyed on cars) - you will get a very smooth surface. |
Available
Coatings + Thin Two Component Epoxy + Thick Epoxy Hard Coat + Waterbased Acryl Resins + Urethans, Rubber & Foams Resin free colors & acryls pls. see your low-priced local stores. |
|
 |
Hard Epoxy Coat or 2 component urethane hard coats should be applyed for pressure stable cast molds (if needed fiberglass reinforced) just add wax and fill concrete in. Allows repeated use. |  |
For Facade Molds use fire retardent, shrink free foam. There are ie. cement textures and plasters. The molds in the photo were thin epoxy coated and strewn with sand (through a grid), three times. |  Do you have a question? We call you back ASAP! Just fill-out the form here >> |
|
 |
Acryl Resins are two component coats with mineral or metal powders. It is inodorous & weather-proof, UV durable and appreciated for being washable with water. |  |
Polyurethane Based Coatings are the most specialized products used at all. There is rubber, urethan for metal effect, sprayable plastic used for glittering fountain and foam for rockscape. |